What a disappointment

-
As I mentioned a few days ago a talk by Richard Stallman was held on campus and I decided to go. The talk was along the lines of the four freedoms (kind of Stallman's version of Asimov's three laws of robotics). But almost at the end of the talk and before the questions he invited to another unannounced speaker who had some rants about the university.

Everyone is entitled to her own opinion but this was not the reason why I was there so I left. I cannot comment on that other speaker merits but it felt like a commercial in the middle of the talk (and keeping you there from leaving if you wanted to listen the question).

Should that individual have announce his speech people might have decided whether they wanted to attend or not, but the way it was done it felt like a trap. What it may be relevant here is that the university was providing a conference hall for free based on the idea Stallman's speech was of interest for our student and faculty.

As expectation was building up the event was moved to a larger hall, that was not free to have but our school assumed the cost based on the fact that one of our professors was named as the contact person on campus.

I felt someone was not playing nice here. Whether Richard Stallman was deceived or felt he had to step forward to defend someone's speech rights, I do not know.

Bottom line is that I left the conference hall with a bitter sensation. If Stallman's speech is all about ethics he should remember that action speaks louder than voice.

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Stepper motor step signal timing calculation

-
Image
While we use stepper motors in many devices, the timing of the step signals is not always well understood. Most of us can see how a fixed speed is a bad idea unless the speed of motion is really slow, but it is fixed speed what is really to generate with simple code. You just can use the Arduino Blink example to send a fixed frequency of pulses to a stepper motor driver. If too slow, just reduce the delay value. But for most real-life applications variable speed controls will perform better. These systems will speed up the motor to a given maximum speed and it will slow it down to stop at the desired step count. But understanding the math behind this process is sometimes not obvious. Let us start with the simple case of the so-called trapezoidal speed motion profile. Here motion takes place in three phases: acceleration, constant speed (cruising) and deceleration. But the point is how can our code create such a behavior. Stepper motor drivers usually accept two signals to control
Read more